Inflammation

Inflammation

Shop Popular Products

Product Categories

No categories available

FAQs

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur quis risus id enim vehicula interdum et ac sem.

  • The expected molecular weight (MW) listed in the product datasheet is based solely on the size of the target protein’s amino acid sequence. It’s important to remember that many factors can affect the banding pattern of your western blot including: (1) the existence of a splice variant, (2) the quality of the loaded sample, (3) the protein extraction method, and (4) the protein transfer conditions. To achieve accurate results, you may need to systematically adjust the protein extraction method or the protein transfer conditions.

    • If the band’s MW is below the expected MW it could be due to a splice variant with a slightly different MW.
      • Heat the samples at 70°C for 10 min.
      • Increase the transfer time.
    • If the band’s MW is above the expected MW, it could be due to post-translational modifications.
    • In either event, you should use a blocking peptide as a negative control.

  • Some toxins and peptides are soluble in DMSO; you can find this information in the product specification section. For these products, prepare a concentrated stock solution first.

    1. Centrifuge vial (10,000 x g, 5 minutes) before adding solvent.
    2. Dissolve the lyophilized reagent in DMSO. We recommend keeping a concentrated stock solution at 1-10 mM (100-1000X higher than the final working concentration).
    3. Once the peptide is completely dissolved in DMSO, slowly dilute the peptide in pure water (or buffer) to the desired final working concentration.

    Note: We recommend that you maintain a DMSO concentration as low as possible. For cell assays, a final concentration of 0.1–0.5% DMSO (v/v) is considered acceptable. For other experiments, 5% DMSO (v/v) is recommended; adjust this according to your experimental requirements.

  • FAQ 3FAQ 3FAQ 3FAQ 3

2041 Results
  • Anti-mGluR1 (extracellular)-ATTO Fluor-488 Antibody
    Anti-mGluR1 (extracellular)-ATTO Fluor-488 Antibody
    A Rabbit Polyclonal Antibody to Metabotropic Glutamate Receptor 1 Conjugated to the Fluorescent Dye ATTO-488
    • Product Code: AGC-006-AG
    • Short Description: A Rabbit Polyclonal Antibody to Metabotropic Glutamate Receptor 1 Conjugated to the Fluorescent Dye ATTO-488
    • Host: Rabbit
    • Label: ATTO 488
    • Reactivity: Human, Rat, Mouse
    • Applications: Immunofluorescence, Immunohistochemistry
    • Target: Metabotropic glutamate receptor 1, GRM1, mGlu1, GPRC1a, PPP1R85, SCAR13
  • Anti-mGluR1 (extracellular) Antibody
    Anti-mGluR1 (extracellular) Antibody
    A Rabbit Polyclonal Antibody to Metabotropic Glutamate Receptor 1
    • Product Code: AGC-006
    • Short Description: A Rabbit Polyclonal Antibody to Metabotropic Glutamate Receptor 1
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Indirect flow cytometry, Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation
    • Target: Metabotropic glutamate receptor 1, GRM1, mGlu1, GPRC1a, PPP1R85, SCAR13
  • Guinea pig Anti-GluR2 (GluA2) (extracellular) Antibody
    Guinea pig Anti-GluR2 (GluA2) (extracellular) Antibody
    A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 2 (GluR2)
    • Product Code: AGC-005-GP
    • Short Description: A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 2 (GluR2)
    • Host: Guinea Pig
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence
    • Target: AMPA receptor 2, Glutamate receptor 2, Ionotropic glutamate receptor 2, AMPA-selective glutamate receptor 2, GRIA2, GluR-B, GluR-K2
  • Anti-GluR2 (GluA2) (extracellular)-ATTO Fluor-488 Antibody
    KO Validate'
    Anti-GluR2 (GluA2) (extracellular)-ATTO Fluor-488 Antibody
    A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 2 (GluR2) Conjugated to the Fluorescent Dye ATTO-488
    • Product Code: AGC-005-AG
    • Short Description: A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 2 (GluR2) Conjugated to the Fluorescent Dye ATTO-488
    • Host: Rabbit
    • Label: ATTO 488
    • Reactivity: Rat, Mouse
    • Applications: Immunofluorescence, Immunohistochemistry
    • Target: AMPA receptor 2, Glutamate receptor 2, Ionotropic glutamate receptor 2, AMPA-selective glutamate receptor 2, GRIA2, GluR-B, GluR-K2
  • Anti-GluR2 (GluA2) (extracellular) Antibody
    KO Validate'
    Anti-GluR2 (GluA2) (extracellular) Antibody
    A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 2 (GluR2)
    • Product Code: AGC-005
    • Short Description: A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 2 (GluR2)
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: AMPA receptor 2, Glutamate receptor 2, Ionotropic glutamate receptor 2, AMPA-selective glutamate receptor 2, GRIA2, GluR-B, GluR-K2
  • Guinea pig Anti-GluR1 (GluA1) (extracellular) Antibody
    Guinea pig Anti-GluR1 (GluA1) (extracellular) Antibody
    A Guinea Pig Polyclonal Antibody to AMPA-Selective Glutamate Receptor 1 (GluR1)
    • Product Code: AGC-004-GP
    • Short Description: A Guinea Pig Polyclonal Antibody to AMPA-Selective Glutamate Receptor 1 (GluR1)
    • Host: Guinea Pig
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunohistochemistry
    • Target: AMPA Receptor 1, Glutamate receptor 1, Ionotropic glutamate receptor 1, AMPA-selective glutamate receptor 1, GRIA1, GluR-A, GluR-K1
  • Anti-GluR1 (GluA1) (extracellular)-ATTO Fluor-594 Antibody
    KO Validate'
    Anti-GluR1 (GluA1) (extracellular)-ATTO Fluor-594 Antibody
    A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 1 (GluR1) Conjugated to the Fluorescent Dye ATTO-594
    • Product Code: AGC-004-AR
    • Short Description: A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 1 (GluR1) Conjugated to the Fluorescent Dye ATTO-594
    • Host: Rabbit
    • Label: ATTO 594
    • Reactivity: Human, Rat, Mouse
    • Applications: Live cell imaging, Immunocytochemistry, Immunofluorescence
    • Target: AMPA Receptor 1, Glutamate receptor 1, Ionotropic glutamate receptor 1, AMPA-selective glutamate receptor 1, GRIA1, GluR-A, GluR-K1
  • Anti-GluR1 (GluA1) (extracellular) Antibody
    KO Validate'
    Anti-GluR1 (GluA1) (extracellular) Antibody
    A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 1 (GluR1)
    • Product Code: AGC-004
    • Short Description: A Rabbit Polyclonal Antibody to AMPA-Selective Glutamate Receptor 1 (GluR1)
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunohistochemistry
    • Target: AMPA Receptor 1, Glutamate receptor 1, Ionotropic glutamate receptor 1, AMPA-selective glutamate receptor 1, GRIA1, GluR-A, GluR-K1
  • Anti-NMDAR2B (GluN2B) (extracellular)-ATTO Fluor-594 Antibody
    Anti-NMDAR2B (GluN2B) (extracellular)-ATTO Fluor-594 Antibody
    A Rabbit Polyclonal Antibody to NMDA Receptor 2B (GluN2B) Conjugated to the Fluorescent Dye ATTO-594
    • Product Code: AGC-003-AR
    • Short Description: A Rabbit Polyclonal Antibody to NMDA Receptor 2B (GluN2B) Conjugated to the Fluorescent Dye ATTO-594
    • Host: Rabbit
    • Label: ATTO 594
    • Reactivity: Human, Rat, Mouse
    • Applications: Immunofluorescence, Immunohistochemistry
    • Target: NMDA receptor 2B, Ionotropic glutamate receptor subunit ε2, N-methyl-D-aspartate receptor subunit 2B, GRIN2B, NR2B
  • Anti-NMDAR2B (GluN2B) (extracellular) Antibody
    KO Validate'
    Anti-NMDAR2B (GluN2B) (extracellular) Antibody
    A Rabbit Polyclonal Antibody to NMDA Receptor 2B (GluN2B)
    • Product Code: AGC-003
    • Short Description: A Rabbit Polyclonal Antibody to NMDA Receptor 2B (GluN2B)
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: NMDA receptor 2B, Ionotropic glutamate receptor subunit ε2, N-methyl-D-aspartate receptor subunit 2B, GRIN2B, NR2B
Load More Results
Loading...

Have questions about our products?

Step-by-Step Protocols