Cardiac Failure

Cardiac Failure

Shop Popular Products

Product Categories

No categories available

FAQs

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur quis risus id enim vehicula interdum et ac sem.

  • The expected molecular weight (MW) listed in the product datasheet is based solely on the size of the target protein’s amino acid sequence. It’s important to remember that many factors can affect the banding pattern of your western blot including: (1) the existence of a splice variant, (2) the quality of the loaded sample, (3) the protein extraction method, and (4) the protein transfer conditions. To achieve accurate results, you may need to systematically adjust the protein extraction method or the protein transfer conditions.

    • If the band’s MW is below the expected MW it could be due to a splice variant with a slightly different MW.
      • Heat the samples at 70°C for 10 min.
      • Increase the transfer time.
    • If the band’s MW is above the expected MW, it could be due to post-translational modifications.
    • In either event, you should use a blocking peptide as a negative control.

  • Some toxins and peptides are soluble in DMSO; you can find this information in the product specification section. For these products, prepare a concentrated stock solution first.

    1. Centrifuge vial (10,000 x g, 5 minutes) before adding solvent.
    2. Dissolve the lyophilized reagent in DMSO. We recommend keeping a concentrated stock solution at 1-10 mM (100-1000X higher than the final working concentration).
    3. Once the peptide is completely dissolved in DMSO, slowly dilute the peptide in pure water (or buffer) to the desired final working concentration.

    Note: We recommend that you maintain a DMSO concentration as low as possible. For cell assays, a final concentration of 0.1–0.5% DMSO (v/v) is considered acceptable. For other experiments, 5% DMSO (v/v) is recommended; adjust this according to your experimental requirements.

  • FAQ 3FAQ 3FAQ 3FAQ 3

286 Results
  • Anti-K<sub>ir</sub>2.1/KCNJ2 (extracellular) Antibody
    Anti-Kir2.1/KCNJ2 (extracellular) Antibody
    A Rabbit Polyclonal Antibody to Kir2.1 (KCNJ2) Channel
    • Product Code: APC-159
    • Short Description: A Rabbit Polyclonal Antibody to Kir2.1 (KCNJ2) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Indirect flow cytometry, Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunohistochemistry
    • Target: Inward rectifier potassium channel 2, IRK1, HIRK1, LQT7, SQT3
  • Anti-K<sub>ir</sub>2.1/KCNJ2 (extracellular)-FITC Antibody
    Anti-Kir2.1/KCNJ2 (extracellular)-FITC Antibody
    A Rabbit Polyclonal Antibody to Kir2.1 Conjugated to the Fluorescent Dye FITC
    • Product Code: APC-159-F
    • Short Description: A Rabbit Polyclonal Antibody to Kir2.1 Conjugated to the Fluorescent Dye FITC
    • Host: Rabbit
    • Label: FITC
    • Reactivity: Human, Rat, Mouse
    • Applications: Flow cytometry
    • Target: Inward rectifier potassium channel 2, IRK1, HIRK1, LQT7, SQT3
  • Anti-K<sub>ir</sub>2.1/KCNJ2 Antibody
    Anti-Kir2.1/KCNJ2 Antibody
    A Rabbit Polyclonal Antibody to Kir2.1 (KCNJ2) Channel
    • Product Code: APC-026
    • Short Description: A Rabbit Polyclonal Antibody to Kir2.1 (KCNJ2) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Indirect flow cytometry, Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: Inward rectifier potassium channel 2, IRK1, HIRK1, LQT7, SQT3
  • Anti-K<sub>ir</sub>6.1 (KCNJ8) Antibody
    KO Validate'
    Anti-Kir6.1 (KCNJ8) Antibody
    A Rabbit Polyclonal Antibody to Kir6.1 (KCNJ8) Channel
    • Product Code: APC-105
    • Short Description: A Rabbit Polyclonal Antibody to Kir6.1 (KCNJ8) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: ATP-sensitive inward rectifier potassium channel 8, uKATP-1
  • Anti-K<sub>V</sub>1.5 (KCNA5) (extracellular) Antibody
    Anti-KV1.5 (KCNA5) (extracellular) Antibody
    A Rabbit Polyclonal Antibody to KV1.5 (KCNA5) Channel
    • Product Code: APC-150
    • Short Description: A Rabbit Polyclonal Antibody to KV1.5 (KCNA5) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Mouse
    • Applications: Indirect flow cytometry, Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunohistochemistry
    • Target: Potassium voltage-gated channel subfamily A member 5
  • Anti-K<sub>V</sub>1.5 (KCNA5) (extracellular)-FITC Antibody
    Anti-KV1.5 (KCNA5) (extracellular)-FITC Antibody
    A Rabbit Polyclonal Antibody to KV1.5 (extracellular) conjugated to the fluorescent dye FITC
    • Product Code: APC-150-F
    • Short Description: A Rabbit Polyclonal Antibody to KV1.5 (extracellular) conjugated to the fluorescent dye FITC
    • Host: Rabbit
    • Label: FITC
    • Reactivity: Human, Rat, Mouse
    • Applications: Live cell imaging, Flow cytometry
    • Target: Potassium voltage-gated channel subfamily A member 5
  • Anti-K<sub>V</sub>1.5 (KCNA5) Antibody
    Anti-KV1.5 (KCNA5) Antibody
    A Rabbit Polyclonal Antibody to KV1.5 (KCNA5) Channel
    • Product Code: APC-004
    • Short Description: A Rabbit Polyclonal Antibody to KV1.5 (KCNA5) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: Potassium voltage-gated channel subfamily A member 5
  • Anti-K<sub>V</sub>1.5 (KCNA5)-ATTO Fluor-550 Antibody
    Anti-KV1.5 (KCNA5)-ATTO Fluor-550 Antibody
    A Rabbit Polyclonal Antibody to KV1.5 (KCNA5) Channel Conjugated to the Fluorescent Dye ATTO-550
    • Product Code: APC-004-AO
    • Short Description: A Rabbit Polyclonal Antibody to KV1.5 (KCNA5) Channel Conjugated to the Fluorescent Dye ATTO-550
    • Host: Rabbit
    • Label: ATTO 550
    • Reactivity: Human, Rat, Mouse
    • Applications: Immunofluorescence, Immunohistochemistry
    • Target: Potassium voltage-gated channel subfamily A member 5
  • Anti-K<sub>V</sub>4.2 Antibody
    Anti-KV4.2 Antibody
    A Rabbit Polyclonal Antibody to KV4.2 Channel
    • Product Code: APC-023
    • Short Description: A Rabbit Polyclonal Antibody to KV4.2 Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: Voltage-gated potassium channel subfamily D member 2, KCND2, Shal1, RK5
  • Anti-K<sub>V</sub>4.2-ATTO Fluor-633 Antibody
    Anti-KV4.2-ATTO Fluor-633 Antibody
    A Rabbit Polyclonal Antibody to KV4.2 Channel Conjugated to the Fluorescent Dye ATTO-633
    • Product Code: APC-023-FR
    • Short Description: A Rabbit Polyclonal Antibody to KV4.2 Channel Conjugated to the Fluorescent Dye ATTO-633
    • Host: Rabbit
    • Label: ATTO 633
    • Reactivity: Rat, Mouse
    • Applications: Immunofluorescence, Immunohistochemistry
    • Target: Voltage-gated potassium channel subfamily D member 2, KCND2, Shal1, RK5
Load More Results
Loading...

Have questions about our products?

Step-by-Step Protocols