Neurodevelopment

Neurodevelopment

Shop Popular Products

Product Categories

No categories available

FAQs

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur quis risus id enim vehicula interdum et ac sem.

  • The expected molecular weight (MW) listed in the product datasheet is based solely on the size of the target protein’s amino acid sequence. It’s important to remember that many factors can affect the banding pattern of your western blot including: (1) the existence of a splice variant, (2) the quality of the loaded sample, (3) the protein extraction method, and (4) the protein transfer conditions. To achieve accurate results, you may need to systematically adjust the protein extraction method or the protein transfer conditions.

    • If the band’s MW is below the expected MW it could be due to a splice variant with a slightly different MW.
      • Heat the samples at 70°C for 10 min.
      • Increase the transfer time.
    • If the band’s MW is above the expected MW, it could be due to post-translational modifications.
    • In either event, you should use a blocking peptide as a negative control.

  • Some toxins and peptides are soluble in DMSO; you can find this information in the product specification section. For these products, prepare a concentrated stock solution first.

    1. Centrifuge vial (10,000 x g, 5 minutes) before adding solvent.
    2. Dissolve the lyophilized reagent in DMSO. We recommend keeping a concentrated stock solution at 1-10 mM (100-1000X higher than the final working concentration).
    3. Once the peptide is completely dissolved in DMSO, slowly dilute the peptide in pure water (or buffer) to the desired final working concentration.

    Note: We recommend that you maintain a DMSO concentration as low as possible. For cell assays, a final concentration of 0.1–0.5% DMSO (v/v) is considered acceptable. For other experiments, 5% DMSO (v/v) is recommended; adjust this according to your experimental requirements.

  • FAQ 3FAQ 3FAQ 3FAQ 3

738 Results
  • Anti-LAT2 (SLC7A8) (extracellular)-FITC Antibody
    Anti-LAT2 (SLC7A8) (extracellular)-FITC Antibody
    A Rabbit Polyclonal antibody to LAT2 (SLC7A8) (extracellular) conjugated to the fluorescent dye FITC
    • Product Code: ANT-108-F
    • Short Description: A Rabbit Polyclonal antibody to LAT2 (SLC7A8) (extracellular) conjugated to the fluorescent dye FITC
    • Host: Rabbit
    • Label: FITC
    • Reactivity: Human, Rat, Mouse
    • Applications: Live cell imaging, Flow cytometry
    • Target: Large Neutral Amino Acids Transporter Small Subunit 2, L-Type Amino Acid Transporter 2, Solute carrier family 7 member 8
  • Anti-LAT3/SLC43A1 (extracellular) Antibody
    Anti-LAT3/SLC43A1 (extracellular) Antibody
    A Rabbit Polyclonal Antibody to LAT3 Transporter
    • Product Code: ANT-193
    • Short Description: A Rabbit Polyclonal Antibody to LAT3 Transporter
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot
    • Target: Large neutral amino acids transporter small subunit 3, L-type amino acid transporter 3, Solute carrier family 43 member 1
  • Anti-Latrophilin-1 (LPHN1) (extracellular) Antibody
    Anti-Latrophilin-1 (LPHN1) (extracellular) Antibody
    A Rabbit  Polyclonal Antibody to Latrophilin-1 Receptor
    • Product Code: ALR-021
    • Short Description: A Rabbit  Polyclonal Antibody to Latrophilin-1 Receptor
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Indirect flow cytometry, Live cell imaging, Western blot, Immunocytochemistry, Immunofluorescence, Immunohistochemistry
    • Target: Calcium-independent alpha-latrotoxin receptor 1, CIRL-1, Adhesion G protein-coupled receptor L1, ADGRL1, Lectomedin-2, LEC2
  • Anti-Latrophilin-3 (extracellular) Antibody
    Anti-Latrophilin-3 (extracellular) Antibody
    A Rabbit Polyclonal Antibody to Latrophilin-3
    • Product Code: ALR-063
    • Short Description: A Rabbit Polyclonal Antibody to Latrophilin-3
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunohistochemistry
    • Target: Adhesion G Protein-Coupled Receptor L3, ADGRL3, Calcium-Independent Alpha-Latrotoxin Receptor 3, LPHN3, Lectomedin-3
  • Anti-LRRC26 Antibody
    Anti-LRRC26 Antibody
    A Rabbit Polyclonal Antibody to LRRC26
    • Product Code: APC-070
    • Short Description: A Rabbit Polyclonal Antibody to LRRC26
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Western blot
    • Target: Leucine-rich repeat-containing protein 26, BK channel auxiliary gamma subunit LRRC26, Cytokeratin-associated protein in cancer, CAPC
  • Anti-LRRK1 Antibody
    Anti-LRRK1 Antibody
    A Rabbit Polyclonal Antibody to LRRK1
    • Product Code: ANR-101
    • Short Description: A Rabbit Polyclonal Antibody to LRRK1
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Western blot
    • Target: Leucine-rich repeat kinase 1, Roco1, RIPK6
  • Anti-LRRTM1 (extracellular) Antibody
    Anti-LRRTM1 (extracellular) Antibody
    A Rabbit Polyclonal Antibody to LRRTM1
    • Product Code: ANR-141
    • Short Description: A Rabbit Polyclonal Antibody to LRRTM1
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Western blot, Immunofluorescence, Immunohistochemistry
    • Target: Leucine-rich repeat transmembrane neuronal protein 1
  • Anti-LRRTM2 (extracellular) Antibody
    Anti-LRRTM2 (extracellular) Antibody
    A Rabbit Polyclonal antibody to LRRTM2 (extracellular)
    • Product Code: ANR-142
    • Short Description: A Rabbit Polyclonal antibody to LRRTM2 (extracellular)
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunohistochemistry
    • Target: Leucine-rich repeat transmembrane neuronal protein 2, Leucine-Rich Repeat Neuronal 2 Protein, LRRN2
  • Anti-Lynx1 (extracellular) Antibody
    Anti-Lynx1 (extracellular) Antibody
    A Rabbit Polyclonal Antibody to Lynx1
    • Product Code: ANC-021
    • Short Description: A Rabbit Polyclonal Antibody to Lynx1
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Indirect flow cytometry, Western blot, Immunofluorescence, Immunohistochemistry
    • Target: Ly-6/Neurotoxin-like protein 1, Endogenous prototoxin LYNX1
  • Anti-MAGT1 (extracellular) Antibody
    Anti-MAGT1 (extracellular) Antibody
    A Rabbit Polyclonal antibody to MAGT1 (extracellular) magnesium transporter.
    • Product Code: ANT-197
    • Short Description: A Rabbit Polyclonal antibody to MAGT1 (extracellular) magnesium transporter.
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Indirect flow cytometry, Live cell imaging, Western blot, Immunohistochemistry
    • Target: Magnesium Transporter 1, Oligosaccharyl Transferase Subunit MAGT1, Implantation-Associated Protein, SLC58A1
Load More Results
Loading...

Have questions about our products?

Step-by-Step Protocols