Pain

Pain

Shop Popular Products

Product Categories

No categories available

FAQs

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur quis risus id enim vehicula interdum et ac sem.

  • The expected molecular weight (MW) listed in the product datasheet is based solely on the size of the target protein’s amino acid sequence. It’s important to remember that many factors can affect the banding pattern of your western blot including: (1) the existence of a splice variant, (2) the quality of the loaded sample, (3) the protein extraction method, and (4) the protein transfer conditions. To achieve accurate results, you may need to systematically adjust the protein extraction method or the protein transfer conditions.

    • If the band’s MW is below the expected MW it could be due to a splice variant with a slightly different MW.
      • Heat the samples at 70°C for 10 min.
      • Increase the transfer time.
    • If the band’s MW is above the expected MW, it could be due to post-translational modifications.
    • In either event, you should use a blocking peptide as a negative control.

  • Some toxins and peptides are soluble in DMSO; you can find this information in the product specification section. For these products, prepare a concentrated stock solution first.

    1. Centrifuge vial (10,000 x g, 5 minutes) before adding solvent.
    2. Dissolve the lyophilized reagent in DMSO. We recommend keeping a concentrated stock solution at 1-10 mM (100-1000X higher than the final working concentration).
    3. Once the peptide is completely dissolved in DMSO, slowly dilute the peptide in pure water (or buffer) to the desired final working concentration.

    Note: We recommend that you maintain a DMSO concentration as low as possible. For cell assays, a final concentration of 0.1–0.5% DMSO (v/v) is considered acceptable. For other experiments, 5% DMSO (v/v) is recommended; adjust this according to your experimental requirements.

  • FAQ 3FAQ 3FAQ 3FAQ 3

771 Results
  • Anti-K<sub>V</sub>1.8 Antibody
    Anti-KV1.8 Antibody
    A Rabbit Polyclonal Antibody to KV1.8 Channel
    • Product Code: APC-157
    • Short Description: A Rabbit Polyclonal Antibody to KV1.8 Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot
    • Target: Potassium voltage-gated channel subfamily A member 10, Cyclic GMP gated potassium channel, KCNA10, KCN1
  • Anti-K<sub>V</sub>12.1 (KCNH8) Antibody
    Anti-KV12.1 (KCNH8) Antibody
    A Rabbit Polyclonal Antibody to KV12.1 Channel
    • Product Code: APC-113
    • Short Description: A Rabbit Polyclonal Antibody to KV12.1 Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Mouse
    • Applications: Western blot
    • Target: Potassium voltage-gated channel subfamily H member 8, Ether-a-go-go-like potassium channel 3, ELK channel 3, Elk1, hElk1
  • Anti-K<sub>V</sub>12.3 (KCNH4) Antibody
    Anti-KV12.3 (KCNH4) Antibody
    A Rabbit Polyclonal Antibody to KV12.3 Channel
    • Product Code: APC-116
    • Short Description: A Rabbit Polyclonal Antibody to KV12.3 Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Mouse
    • Applications: Western blot, Immunohistochemistry
    • Target: Potassium voltage-gated channel subfamily H member 4, Ether-a-go-go-like potassium channel 1, ELK channel 1, rElk1, Elk3, Brain-specific eag-like channel 2, BEC2
  • Anti-K<sub>V</sub>2.2 (KCNB2) Antibody
    Anti-KV2.2 (KCNB2) Antibody
    A Rabbit Polyclonal Antibody to KV2.2 (KCNB2) Channel
    • Product Code: APC-120
    • Short Description: A Rabbit Polyclonal Antibody to KV2.2 (KCNB2) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunocytochemistry, Immunofluorescence, Immunoprecipitation, Immunohistochemistry
    • Target: Voltage-gated potassium channel subfamily B member 2, CDRK
  • Anti-K<sub>V</sub>6.4 (KCNG4) Antibody
    Anti-KV6.4 (KCNG4) Antibody
    A Rabbit Polyclonal antibody to Kv6.4 (KCNG4)
    • Product Code: APC-138
    • Short Description: A Rabbit Polyclonal antibody to Kv6.4 (KCNG4)
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Western blot, Immunohistochemistry
    • Target: Potassium Voltage-Gated Channel Subfamily G Member 4, Voltage-gated potassium channel subunit Kv6.4
  • Anti-K<sub>V</sub>8.1 (KCNV1) Antibody
    Anti-KV8.1 (KCNV1) Antibody
    A Rabbit Polyclonal antibody to KV8.1 (KCNV1)
    • Product Code: APC-139
    • Short Description: A Rabbit Polyclonal antibody to KV8.1 (KCNV1)
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot
    • Target: Potassium Voltage-Gated Channel Subfamily V Member 1
  • Anti-Mouse K<sub>V</sub>1.7 (KCNA7) Antibody
    Anti-Mouse KV1.7 (KCNA7) Antibody
    A Rabbit Polyclonal Antibody to KV1.7 (KCNA7) Channel
    • Product Code: APC-063
    • Short Description: A Rabbit Polyclonal Antibody to KV1.7 (KCNA7) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat
    • Applications: Western blot
    • Target: Potassium voltage-gated channel subfamily A member 7
  • Anti-MRGPRD (GPCR TGR7) Antibody
    KO Validate'
    Anti-MRGPRD (GPCR TGR7) Antibody
    A Rabbit Polyclonal Antibody to MRGPRD (GPCR TGR7) Receptor
    • Product Code: AMR-061
    • Short Description: A Rabbit Polyclonal Antibody to MRGPRD (GPCR TGR7) Receptor
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Rat, Mouse
    • Applications: Western blot, Immunofluorescence, Immunohistochemistry
    • Target: Mrgd, Mas-related G-protein coupled receptor member D, G-protein coupled receptor TGR7, β-Alanine receptor
  • Anti-MRGPRE Antibody
    Anti-MRGPRE Antibody
    A Rabbit Polyclonal Antibody to MRGPRE Receptor
    • Product Code: AMR-062
    • Short Description: A Rabbit Polyclonal Antibody to MRGPRE Receptor
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunofluorescence, Immunohistochemistry
    • Target: Mas-related G-protein coupled receptor member E, GPCR MRGE, GPR167
  • Anti-Na<sub>V</sub>1.6 (SCN8A) Antibody
    KO Validate'
    Anti-NaV1.6 (SCN8A) Antibody
    A Rabbit Polyclonal Antibody to NaV1.6 (SCN8A) Channel
    • Product Code: ASC-009
    • Short Description: A Rabbit Polyclonal Antibody to NaV1.6 (SCN8A) Channel
    • Host: Rabbit
    • Label: Unconjugated
    • Reactivity: Human, Rat, Mouse
    • Applications: Western blot, Immunocytochemistry, Immunofluorescence, Immunohistochemistry
    • Target: Sodium channel voltage-gated type VIII alpha subunit, NaCh6, PN4, CerIII
Load More Results
Loading...

Have questions about our products?

Step-by-Step Protocols